Carpuride GPS Mount for a motorcycle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Ram ball mount attachment wasn't strong enough so I fixed it with overkill
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Carpuride came with a Ram mount. I tried removing the aluminum bracket with the ram ball on it but noticed it was metal and had a thermal pad on the back to help dissipate heat. I figured that better stay. So I took the screw out of the ball and made a mount that attached to where the ball was. To get the mount to not rotate on the mounting bar I cut a patch of old inner tube and sandwiched it between the two mount halfs. It's designed for:
4 - m5x25 Cap screws
2 - m5x35 Cap screws
2 - m5x40 Cap screws
8 - m5 nylock nuts.
Might be overkill, but my previous bodged contraption that was holding it kept slipping and pointing down at my gas tank.
I suggest printing this in, at least, PETG since it'll be in the sun where PLA won't hold up.