DragonBurner MadMax optimized
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
In addition to the remix mods listed, there is a Logo LED carrier that allows for wiring on either side... this will allow simpler wiring by running the Logo as the first light in the chain.
The extruder mount/board mount is meant to take 2 m3x4x4.2 heatserts in the side away from the board. if not using a cover then the board mount screws enter from the board side and keep the mount posts in compression. If using the board cover, use long screws from the back and M3 nuts to secure the board... then a second set of M3 nuts to secure the cover. Cover has one leg shorter to allow for the grounding eyelet for the motor ground.
Dragonfly BMS mount also included, but I have not tested (made for someone else).
T0 and T1 Diffusers included... If you've gone this far and need more toolhead numerals, I assume you can remix them!