Indoor Sundial
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Interior sundial inspired clock powered by a Raspberry Pi Zero 2 W
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Historical Context
- License
- Creative Commons — Attribution — Noncommercial
Interior sundial inspired clock powered by a Raspberry Pi Zero 2 W and a WS2812B LED strip. The device simulates sunlight movement using LEDs to display the current time in a modern interpretation of traditional sundials.
The enclosure is designed for easy 3D printing and straightforward assembly, while still providing enough space for the electronics inside. The project needs following electronics:
Raspberry Pi Zero 2 W
WS2812B LED strip
USB-C power input
Waveshare 2.13inch Touch e-Paper HAT display
Pimoroni RGB potentiometr
PIR Sensor HC-SR501
Button
6x threaded insert M3
4x M3x10 mm screw
2x M3x20 mm screw
10x M2x10 mm screw
Jumper wires
The clock is controlled by custom software and can also be configured through a web interface. Which can be found here: https://github.com/Parrot2CZE/BP
This project was created as part of a bachelor’s thesis focused on combining modern electronics, programming, and the historical concept of sundials into a functional interior device.
Licensed under Creative Commons Attribution-NonCommercial 4.0 (CC BY-NC 4.0)
You are free to print and modify this model for personal use, but redistribution or commercial use is not allowed.