Remixed Yosegi Puzzle Box Simplified
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
REMIXED: Simplified Yosegi Puzzle Box with robust components and added reinforcements where needed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution
All credit for the initial design goes to original designer linked here:
REMIX INFO:
The solve is the same process as the original. Nothing has been added or subtracted from the solve. Here I have redesigned and/or combined multiple components from the original design. I only kept the files as a simplified model to save in print times, reduce complexity, and improve strength while limiting broken parts in the assembly process. I tried to stay mostly true to the original design with some specific component rework. The remixed tolerances are substantially more accurate with respect to action between the pieces. The faceplate could use tightening up, but I chose to leave this clearance a little loose. There are two files, one in an 'assembled' state snd the other in an 'unassembled' state.
Assembled:
This shows you where each piece actually goes. All pieces are in their respective place in the ‘ready-to-solve’ configuration. This aids in the assembly of the puzzle saving some time by not having to figure out object placement.
Unassembled:
This file is broken up into several plates because I am using a Creality K2 with a 260mmx260mmx260mm build area. You may have to adjust arrangement to suite your printer. It does NOT show you object's respective place in the final assembly. If you're wanting the assembly to be its own side quest type puzzle, this is the file for you.
Components Combined:
Innersideplate was joined into the baseassembly. Original innersideplate was redundant.
The lock was joined into the outersideplate. The original would become dislodged if not glued in place.
Components Reworked:
Redesigned lid. Added a lip and overhang on all edges.
Reworked the innermiddle component to encapsulate the innerlatch. Original innerlatch would fall between the innerside and outersideplate locking the puzzle up. This required disassembly to correct, often breaking parts in the process.
Extended the frontplate locks as I broke several in the assembly process from the original design.
Removed the side triangular design features from the baseassembly and made this a solid edge along both sides.
Assembly is straightforward. The outersideplate combines the lock and requires a little finesse to fit into place properly. You MUST have everything properly aligned to place the lock. You may need to lightly sand a few edges to fit as tolerances are much tighter in this model.
You cannot print this assembled. Once you bring it into your slicer, you will have to split into objects and arrange on the build plate(s).
This remix does not require supports.