Model Rocket Fin Jig/Template for 3/32" fins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fin gluing fixture (jig) for model rockets with balsa or board fins, this version for a 3/32" balsa thickness. If…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fin gluing fixture (jig) for model rockets with balsa or board fins, this version for a 3/32" balsa thickness. If there are requests, I'll make other fixtures optimized for other thicknesses.
Mark fin locations as you would normally. Position this fixture on a small and medium size body tube. Align over fin placement marks. Secure fixture to tube with a rubber band or tape. Glue fin to body and secure to fixture with a clip or clothespin. Attaches one fin at a time. Let dry, reposition, and attach the next fin.
Designed for simple, low-fi builds, with scouting/STEM groups and casual builders in mind.
Category: Hobby