Small Boxing Glove Voronoi
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small boxing glove in a voronoi style, easily printable in two colors, that can be used as decoration, keychain, ...
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing Information:
If you have an MMU, you can split the model to its pieces and use two different filaments for both pieces (no purge tower needed). Otherwise, you can achieve the same results by changing your filament during the print.
Use tree support to support the voronoi structure.
Use a brim, since its contact surface with the printbed isn't all that much.
Being small and voronoi, I recommend using a stronger material to print this model, especially if used as keychain. Given that it also might be with contact in water for example, a non-porous material like PETG is recommended to avoid mold contamination.