Rugged Box for STlinkV3-SET with cable compartment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Rugged Box with cable compartment and insert for STlinkV3-SET + Spacer Plate from @ShinobuTezuka_753055
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a rugged box for the STlinkV3-SET with @ShinobuTezuka_753055s awesome STLINK-V3SET Spacer Plate With Pin Protector and 2mm Shrouded header model. The box insert is split into two parts. The top part holds the STlink and the bottom parts acts as a compartment for cables belonging to the STlink. The seal of the original Rugged Box model was also modified to fit a standard 3mm EPDM-Rubber-Seal (Aliexpress). A model for the original seal is also supplied below.
For assembly six M3x30mm screws are needed. If you opt for the EPDM-Seal it has to be glued to the box with e.g. CA-Glue.