1 / 1
3.5" and 2.5" (inch) Hard Drive (HDD) and Solid State Disk (SSD) Display Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple display stand for all your old hard drives and SSD's.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 39
- Makes
- 1
- Views
- 253
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
These are two very simple models to display all your old HDDs and SSDs. The 3.5" stand uses a little over 15 grams of material, and the 2.5" stand uses less than 7 grams of material. Enjoy!
Print Instructions
Layer Height: 0.2mm .4mm Nozzle
Infill: 15-20%
Filament: ABS, ASA, PETG, PLA should all work fine.