Feet tips for USA-OK Repeating Leg Chair, repair/replacement parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protective tips for the feet of the USA-OK Repeating Leg Chair, attach to tips of the legs with a small screw and nut
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Protective feet, or tips for the legs of the USA-OK Repeating Leg Chair, that was launched on Kickstarter in 2014. There were only a few hundred of these chairs made, and replacement parts have only been available directly from the designers. I'm releasing the file online for anyone to download and print replacement parts for their chair. The part has a small hole on the back side for a nut, then a small screw can be inserted from the front and tightened to hold the foot in place. I'd suggest using a strong plastic like PETG, PETG-CF, or Nylon but since they are now easily fabricated and replaced, you can try anything. Print as solidly as possible, though I have had good luck with regular infill levels as long as there are several outside and top/bottom layers.
