Parametric Bandsaw Table for portable bandsaw Parkside PMBA20 20 V
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric Bandsaw Table for portable bandsaw Parkside PMBA20 20 VThis table is meant to be hold in a vise. The use of…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Parametric Bandsaw Table for portable bandsaw Parkside PMBA20 20 V
This table is meant to be hold in a vise. The use of a triggerlock is recommended:
Required 3D printed parts:
Table.stl or Table_Extended.stl (1x)
AnglePiece.stl (1x)
Optional 3D printed parts:
Jack.stl (1x)
SupportJack.stl (1x)
Required other parts:
conehead screw M5x30 (5x)
conehead screw M5x20 (5x), one those screws need to be cut down to length of 18 mm
knurlnuts M5 (5x)
Remarks:
Table_Extended.stl is recommended. This keeps the work piece well supported for most of the cut.
The use of the Support Jack is recommended; it makes the table much more sturdy.
M5 screwholes need to be tapped into the Plate that holds the table to the bandsaw. It is probably easiest to transfer punch these holes once the table has been printed.
Category: Machine Tools