front gripp A&K M249
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a free electrical solution for the M249 To convert it into a Stationary MG
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used a switch direktly conectet to the wires of the motor. i used a T Plug in between them but it will only fit verry tightly (optional to tetach the grip from the MG).
u will have th bridge the original swith with is located abouth the original pistol grip (to do this u can use the mechanic build in to the grip and just fix the littel screw wich is pointing into the swich using a nut and like 3 washers, ore u just solder the conections together.)
the button to shoot is just screewed in using a long m4 screw, a nut and some washers to center it in the middle. It only lays on top of the switch and gets pushed up by the internal spring of the switch.
the switch is just pushed in the hole and fits verry tightly mayby u have to file a littlebit away from the switch. u can also drill a hole to fix it in place but mine was so tight that i skipped it
a Teammate of mine later replaced the u shaped plates (Platten MG) with metal ones to prevent malfinction in the field
PS: If u need a more detailed instruction for the assembly feel free to comment.