1 / 3
Sonos Play:1 Wall Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a simple angled wall mount bracket for the Sonos Play:1
I designed it without holes, so you can mount the speaker either right side up or upside down. Just use a 1/4-20 hex bolt about 1" long and washers as needed. Attach bracket to wall using screws or screws and anchor depending on wall type. Then attach speaker to bracket using bolt and open ended wrench. Wrap cord around bracket to remove excess cable.
Enjoy
Print Settings
Printer:
Reprap Prusa
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
60%
Notes:
Prefer ABS due to durability, but either should be fine.
Category: Household