Kwikset Halo Select Smartlock Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kwikset Halo Select lock cover to protect the lock from sunlight/UV rays.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Kwikset Halo Select and Halo Select Plus lock cover to protect the lock from direct sunlight UV's.
https://www.kwikset.com/products/detail/halo-select-touchscreen-wi-fi-and-matter-enabled-smart-lock?variant=9800-wifi-thrd-tscr-15
Given the lock has the ability to utilize a magnet for lock status I decided to use the keys provided with the lock as an alternative to retaining the cover against the lock. I found when mounting a cover with magnets against the lock it resulted in the lock losing calibration to the mounting lock magnet.
Typically Kwikset locks are reset to an already existing key, so utilizing the provided keys as a mounting tool worked out perfectly. The back of the key requires cutting the finger side of the key from the key interface tabs to approximately 8.45 mm. The up and down placement of the key within the slot is set by the interface to the lock and then the key is glued into place.