Adjustable Wall-Mounted Holder for Remote Controls and Smartphone

Wall-mounted holder designed to store up to three devices. Suitable for TV remotes, air conditioner remotes, smartphones, and other compact devices. Can be mounted on walls, furniture, or near a workstation. The two-part adjustable construction allows the height to be adapted for devices of different sizes.

Designed to keep frequently used remote controls and a smartphone organized near a TV or workstation.

Design Features

• Three storage compartments that can hold two remote controls and one smartphone:

  • 55 × 25 mm

  • 55 × 25 mm

  • 90 × 25 mm

• Open design for easy cleaning;

• Charging cable access opening for a smartphone;

• Secure fixed wall-mounted construction;

• Easy to print on any printer with a 220 × 220 mm build area;

• Low filament consumption (approximately 60 g).

Printing Recommendations

• PLA or PETG

• 0.2 mm layer height

• No supports required

• 3–4 wall loops

Mounting

Required hardware for installation:

• 4 countersunk screws, 16 mm long.

Installation notes:

• Designed for mounting on a flat vertical surface using countersunk screws;

• Horizontal distance between mounting holes A: 160 mm;

• Recommended spacing between the upper and lower parts: 40 mm. This reduces the risk of devices falling out;

• The model is not designed for mounting with double-sided adhesive tape;

• Part 1 (upper part) includes access holes “B” for screwdriver access during installation.