Dillon RF100 Primer Filler Small Primer chute adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Works better than the stock small primer adapter
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This part replaces the small primer chute at the end of the ramp. It is offset to allow a smoother transition into the hole and doesn't flip primers.
I printed with a 0.4 but you might see better results with a 0.2, if you try it let me know how it goes.
Some cleanup will be required on the bottom side. I tried printing with and without supports, they both work but with supports needs less cleanup. Test that the tube fits flat and that primers fall through before installing for the first time.
I use the back of an Xacto blad as a scraper for the tube portion and a small sharp flat blade screwdriver bit to scrape the primer tube seat.