remotojoy-minus dock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dock for remotojoy-minus.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
This is a dock for remotojoy-minus.
The following parts are required for assembly.
KCD11 Rocker Switch (https://aliexpress.com/item/4000973563250.html)
USB Type-C Connector (https://aliexpress.com/item/1005006297697300.html)
JST PH2.0 2Pin Connector and Wire(https://aliexpress.com/item/1005009087160808.html)
KY-016 RGB LED Module(https://aliexpress.com/item/1005009087160808.html) (Option)
8 x M2 length of 5 to 6 mm
You can add a status light by wiring a KY-016 RGB LED Module to the LED through-hole on the left side of the board.
In that case, use remotejoy-minus-dock-top_with_LED.stl for the top shell.
If you have already printed using the existing remotejoy-minus-dock-top.stl, you can add it later by drilling a hole of about 1.5mm in diameter at the position shown in the image and gluing the LED fixing bracket remotejoy-minus-dock-LED_Bracket.stl.
For more details about remotejoy-minus, please refer to the following URL.
https://github.com/SourceK78/remotejoy-minus
The RP2040-zero firmware, which supports the status lamp function, can be downloaded from the following URL.
https://drive.google.com/file/d/1kULxFD15GEw4CZposFsHWDjwnLT3C5AQ/view?usp=drive_link