1 / 3
Spring/ green onion irrigation system
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
System to grow back spring onions using a small bowl
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 6
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The spring onion irrigation system requires a small bowl. The first picture is an old version.
To fit underneath, the bowl should not be taller than 65 mm and should not exceed a diameter of 120mm, 130mm, 140 mm or 150 mm. Four models are available, each with the respective diameters.
The bowl can be refilled with water through the opening in the middle.
Infill: 10-15%
Layer height: 0.2 mm
Supports: no
Material: PLA or PETG
Print upside down