1 / 3
TS100 USB C PD adaptor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
USB C PD add on adaptor for my 3d printed TS100 case
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 2
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Comes in two parts: Main Body where the barrel jack, USB C PD board lives and the lid.
Inrstructions:
Take this particular USB C PD board and file down the front side of the PCB so that the metal connector pokes out.
Cut out the barrel jack.
Solder them together like such.
Slide the soldered assembly into the main body and use VHB tape to stick down the pcb. Flood the entire contents with hot glue so that the barrel jack stays in place. Put on the lid and utilise 2 small self tapping screws to fix the lid in place.