1 / 4
Anti-sag fixture: version with insert nut
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Version of the end fixture of the Anti-Sag device with insert nut.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 107
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the thread for the metal strap mounting does not seem to hold properly (despite the greatest care), and because I don’t like using glue (as it makes the part non-removable), I prepared a clean version using an insert nut.
You will need:
1 x M3 insert nut (I used a M3x5.7x4.6)
1 x screw M3x10
Printing instructions:
PETG or ABS recommended
0.2 mm layer height
2 walls
25% infill
Please see the original model for print and assembly instructions and the bill of material.