Dometic Digital RV Thermostat Recessed Box/Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a recessed box mount for the Dometic 9610008133 RV thermostat for Aliners and other RVs/campers.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a recessed box mount for the "Dometic™ 9610008133 RV Furnace Digital Thermostat." It safely houses the thermostat out of the way while still allowing sufficient airflow around it to ensure accurate readings.
I used this mount to upgrade the original mechanical thermostat in my Aliner to a digital one. It should work in most trailers.
Mounting:
This design offers two mounting options. First, you can simply use the holes on the front to drive screws through and into the backing material (what I did). Alternatively, I have included a backplate which you can use if you wish to use bolts and nuts to hold the thermostat in. It's up to you to decide which way works best for your situation! The holes in the box have a diameter of 4mm, while the holes in the backplate have a diameter of 6mm (to add a little wiggle room).
Printing settings:
Default settings should work fine. You will need supports for the box, unfortunately. I have included GCODE for the CORE One if you wish to take a look at that. The "Thermostat Box - Supported" model has paint-on supports in what I consider an optimal location. For material choice, I would recommend at least PETG, as campers can often get warm inside during the summer.