Eclisse Pocket Door Floor Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A taller floor guide for Eclisse pocket door frames, useful for higher raised pocket doors or an uneven subfloor.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This is a taller (23mm tall) central plastic piece for the Eclisse Pocket Door floor guide, which helps your pocket door stay perfectly centered as it slides through the bottom groove. It was modeled based on the original floor guide plastic piece (12mm tall). The reason why you might want this taller piece is if your pocket door is raised higher than usual, the door height is too short, or if your subfloor is uneven and you need just a bit more height for the piece to slide in the groove.
For assembly, use the original screw that comes with the pocket door frame to attach this piece to the metal floor guide, and then cut off the extra two nibs that stick out with an exacto knife.
I printed this in PETG for durability reasons with a layer height of 0.15mm.