1 / 4
Pyramid & Octahedron decoration; Print In Place — image 1
1 / 4

Pyramid & Octahedron decoration; Print In Place

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A pyramid with hanging Octahedrons

Rating
0 / 5
Likes
17
Downloads
30
Makes
0
Views
110
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution

General

  • 🏗 NO SUPPORTS REQUIRED.

  • ⛔ DO NOT USE BRIMS. 

  • ✅DO TEST WITH THE CLEARANCE MODEL FIRST.

Sizes

This comes in three sizes:  

  • Large: 240, 240, 200; Clearance 0.25mm

  • Medium: 216, 216, 180; Clearance 0.225mm

  • Small: 192, 192, 160; Clearance 0.2mm

⚠ Caution ⚠ If you print a model that goes to your Z-Max make sure you manually move your Z-Axis down after printing and clearing the bed.  Most printers do a positive Z movement in homing, and this could cause a crash.

Clearance

Most modern printers can handle a 0.2 clearance.  Older printers may need a 0.3 clearance.

There is a Joint Clearance Test model to allow you to test your slicer and printer before printing the full model.  You can change your "XY Size Compensation" slicer setting to -0.5 for more clearance, or 0.5 for a tighter clearance.

Additionally if you scale the print, you will want to modify your "XY Size Compensation" accordingly.

Recommended Slicer Settings

I recommend 3 Parameters, 0.16 to 0.18 Layer Height and 50mm² Solid Infill Threshold Area.

Post Print Instructions

The top eye hook, can be broken loose with a twist.  The 4 corner joints will require a 30 degree twist before allowing the rods to drop free.

What if one corner is damaged?

If you have a damaged link, octahedron, or ball joint, you can replace it.  As long as the pyramid's sphere negative is still good you can get a new joint placed in.

First, remove the damaged links and ball joint inside the pyramid and reprint the 4 replacement objects.  Bring a cup of water to boil.  Place the sphere in the water for 5-10 seconds.  Then press the ball into the negative on the pyramid.

Tags