Hueforge Makima NSFW
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Project: Makima.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Charcoal (Black) Transmission Distance: 0.6
PLA BambuLab Matte Ash Gray (Gray) Transmission Distance: 1.5
PLA BambuLab Matte Ivory White (White) Transmission Distance: 3.5
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal (Black)
At layer #15 (1.28mm) swap to Ash Gray (Gray)
At layer #19 (1.6mm) swap to Ivory White (White) for the rest.