Headphone mount for Meganex 8k superlight hard strap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of Sturdy Meta Quest 3 and Quest 2 Headphone Mount to fit the Meganex 8k superlight hard strap
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial
This allows the mounting of the excellent Koss Ksc755 or Porta Pro drivers to the hard strap available for the Meganex 8K superlight.
Required Materials
Two M5x20mm screws with nuts (locknuts are best)
Some thread locker if you have no locknuts
Superglue (ideal but not absolutely necessary)
Hobby knife (or similar)
Printing Instructions
Print at 0.2mm for strength.
Enable “External perimeters first” for dimensional accuracy.
I used 15% infill. I don't think more would change much.
Printing the pin in PETG is recommended so that the compliant mechanism lasts longer.