1 / 4
Inverter Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to mount my inverter to, then strap it down to my Lithium Ion battery pack to keep in place as I move battery.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I made this bracket to keep inverter on battery as I move battery pact around. I only have a 1-inch strap on it now but was made to take up to a 1 1/2inch strap. I drilled and installed 4 M5*8*7 brass threaded inserts to make sure they aligned with inverter slots. I used 4 M5x10mm hex head bolts with washers to hold inverter to brackets. I printed it out with ,6 nozzle taking about 60 minutes per bracket I used 2 brackets. The strap clips I found on Printables. I printed it out vertical.