Custom end stop microswitch bracket for RepRap Fisher Delta 3D Printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom micro-switch bracket that is compatible with the original tower brackets.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This bracket allows the 3 micro-switches to be bolted in place. This greatly improves the consistency of bed leveling cycles compared to the original "cable tie" approach. I wish I did this back in 2015 on day 1.
Each of the 3 brackets will require:
2 M3x16 bolts to attach it to the original idler/tower bracket.
2 M2x16 bolts to attach the micro-switch to the bracket
2 M2 washers for the micro-switch bolts (optional)
2 M3 nuts
2 M2 nuts
I recommend buying a set of M2, M3, M4 bolts, nuts and washers in a variety of lengths. They are really useful for these sort of projects and it saves trying to buy small quantities one project after another.
Featured in my blog post about my Fisher printer:
https://www.tech-spy.co.uk/2026/03/reprappro-fisher-delta-3d-printer/