1 / 2
DeWalt DW735 Planer to Dust Right Quick Change Handle Adapter - Remixed Left — image 1
1 / 2

DeWalt DW735 Planer to Dust Right Quick Change Handle Adapter - Remixed Left

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

points to the left and sits below the top of the planer

Rating
0 / 5
Likes
3
Downloads
19
Makes
0
Views
83
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Update: I have given up on this model 👎.  See my own alternative solution here. 
There is too much stress on the slot making it fragile and easy to break when printed in PLA or PETG.  I can see the use of these angled designs if you have lost the original polycarbonate dust ejection port, or you are able to print in PC (which I cannot), but otherwise steer clear.

Original text:

This remix points the adapter to the left (as you are looking at the back of the planer), and it is oriented so that it doesn't interfere with placing boards on top of the planer.

Update 10/2026: new v5 increases the infill around the fastener layers for added strength, repairs STL errors in the original file, and uses snug supports.  This design is the most fragile at the slot.  I find that the adapter works fine once you have slotted it on, but be very careful attaching or detaching the adapter itself because the slot and hole are not meant to take a flex force like the original polycarbonate part.

Printed in PETG with a 0.4mm nozzle.  An attempt to print this using a 0.6mm nozzle resulted in terrible seam adhesion.