1 / 3
Router radius kit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a radius kit with interchangeable radii parts.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 45
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
There is a nut trap in the print that needs to be inserted at around layer 78 (.2 later height). It is made for a 1/4"-20 nut. There is a picture of the slicer for reference.
The bolt used to attach the radius part and the base should be a socket head cap screw 1/4-20 x 2".
This radius jig router kit requires clamps to hold in place. I used ones off of Amazon: https://a.co/d/03nGU0tA . There is also an included picture for reference.