1 / 4
Fully Parametric Phone Stand w/ Adjustable Angles, Widths, and Heights
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple yet elegant stand to fit any phone
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 120
- Makes
- 2
- Views
- 663
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
Print Settings
Rotate the model onto its side for layer strength. I used 15% triangular infill for my print, but if you need additional support increasing the infill should be fine. If all else fails, increase stand_thickness.
Parameters
phone_width- [mm] How wide your phone is.phone_thickness- [mm] How thick your phone is.stand_height- [mm] How tall the stand should be.stand_thickness- [mm] How thick the stand's supports should be.stand_angle- [deg] The angle from vertical your phone should be held at.slot_width- [mm] How wide the cable slot should be.gap_height- [mm] How big of a gap to leave under the phone.