Abus Urban-I 3 to Buchel Micro Lens ST (lower)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits the Buchel Micro Lens ST in a lower helmet hole for proper beam directionl.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 5
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I wanted to say a big "thank you" to Markus - the author of the source. The personal reason is the Urban-I is the only affordable helmet that fits to my 64 cm sized head comfortably, taking the XL version. The included light by Abus is somehow sub-optimal. So I went for Markus' solution using the Büchel Micro Lens. The only thing that I didn't like is the beam angle of the backlight that is directed more to the sky and not to the traffic behind. I wanted to direct it in parallel to the road. So, time for a remix.
The first option I tried was to just put an additional angle between the base and the mount part. But somehow I found it to be a bit bulky. So I tried another option, putting it in the lower triangle hole. Your base is too big for that, so I resized it 91% in x and y, 128% in z direction, and rearranged the mount together with some bevel. Here is the result.
The only thing is that it came out very slightly too large in x and y. Some sanding made it fit. In the end I liked the tight fit, as the hooks don't have the same hard rim to snap into. I suppose that printing with 99% should result in a good fit. I didn't reprint as I use only one helmet ;-).
Hope this helps other bikers as well - not only those with oversized heads ;-).
PS: Now you have the original backlight as a security spare with you.
Happy and safe biking to all of you!
Wolfgang - alias Canislupus