1 / 2
small trash can (252x170 mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Small trash can for a child's room or toilet. Can be printed from any material (PLA, ABS, PETG)...
You will need 2 M3x12 screws for the lid's rotation axis and 4 sheet metal screws to attach the lid holders. The bucket's handle can be made of TPU, but you can also leave it. After retracting, the protruding part should be cut off. The moving rods should be made of metal. The pedal is held in place by two thin rubber bands or springs.