1 / 2
Giftbox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The STL's are without text, in my pictures i had text with a depth of 1.2mm. Print the bottom with the bottom down. Print the top with the front down (where the text is in my picture). This way you will only need support for the hinges. I printed with Polylite Wood, 0.16mm layer, 3 perimeters and 20% infill. Use 2 m3x20 hex screws to assemble.