Flower Pot | Planter With Saucer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a flower pot for my basil, so I made this one!
- Rating
- 4.964 / 5
- Likes
- 1,023
- Downloads
- 8,223
- Makes
- 69
- Views
- 18,168
- Reviews
- 55
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I needed a flower pot for my basil, so I made this one.
I uploaded the pot with and without holes, depending on whether you need the coaster or not. There are also two versions of this one, with centering and without.
Be sure to print the coaster so that it is waterproof. For this you can also use the prepared 3mf files.
The inside dimensions of the pot are as follows:
Height: 110mm
Diameter top: 128mm
Diameter bottom: 90mm
You can of course scale xy and z in the slicer to your desired size using a percentage calculation.
I added a solid version of the pot on request to be able to print it in vase mode.
In the 3mf files some useful print settings have already been made, e.g. the z-seam in inconspicuous places or enough wall lines for a waterproof bowl.
If you like check out my other designs too!