Garden-Carillon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Fan-Driven Wind chime.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 29
- Makes
- 1
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a Fan-Powered Wind Chime. It's designed to mount to a 0>25" (~6mm) rod, I used a plain steel rod from Lowes.
The first two pipes(bells) play twice a rotation alternating. The remainder play once a rotation, spread out equally over the whole rotation, but 45 degrees out from the first two.
My recommendation would be to use 4-6 perimeters for strength, I might even suggest that the clappers should be printed only as perimeters. I'd print the clapperballs with at least 50% infill to ensure they have some heft to them.
I've also included instructions - based on what I've been able to put together so far, so they may change a bit.
garden-carillon-3d-pd.pdf is actually a 3D file, so you can rotate around and view it from different angles
One More Thing, I might suggest you rub wax into the camshafts
I've added an adapter to use metal pipe instead of the printable plastic ones as they're just not that resonant.