1 / 2
Fumagator Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had some small problems with the original model so I created a remix which fixed them. Also added a coal filter.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 46
- Makes
- 0
- Views
- 564
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Differences to the original
- Added a coal filter holder
- Added a plug for the power port if not used
- Added an accent piece that hides the gap because even without the pegs it would not fit completely
- Removed pegs that didn't fit my fan
Print instructions
The fan holder should be printed with supports from the bottom. The plug and accent are optional.
Build instructions
Test if everything fits with your fan before fully assembling it. I needed to dremel parts of the fan frame away so that the switch would fit. I chose to glue the fan holder and the accent in after wiring and assembling everything.
I have used this switch but bridged it so that both sides turn the fan on: https://www.reichelt.de/miniatur-kippschalter-ein-aus-ein-3-a-250-v-goobay-10022-p285989.html