1 / 4
Water Reserve for Vibiemme Domobar Jr (original edition)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When the water runs out when pulling an espresso, this button can be pressed to access enough water to finish the shot.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Open Community License v1
Print Info
Nozzle: 0.4 mm
Layer: 0.15 mm
Perimeters: 3
Infill: 50% Rectilinear
Filament used: add:north Premium Silk PLA Green
vbm_button
Add vbm_support as support enforcer.
Soluble and breakaway supports work equally well.
The main purpose of the support is keep the actual button stuck to the build plate. If it does come loose. a brim might help.
vbm_nut
No support. No brim.
Assembly
Drill a 12-12,5 mm hole in the cup shelf.
The hole sits 38 mm from the rear of the shelf.