1 / 1
Adventurer AD5X IFS Connector — image 1

Adventurer AD5X IFS Connector

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement IFS connector, for 1/8 inch BSP air fitting.

Rating
0 / 5
Likes
5
Downloads
33
Makes
0
Views
252
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Public Domain

I'm sure every AD5X user wishes that the IFS units had better quality quick-fits.

There are some connectors designed on Printables to take PC4-M10 fittings (GreatSunJester you are a legend!, big thank you). 

 I use the 1/8 BSP fittings which are more common in my region (guys from Air Parts Australia in Golden Beach QLD are an awesome source of these fittings).

There are jigs and tap guides to make it easier ( see Ebay M3-M10 Manual Tapping Machine Vertical Tapping Tool w/Adjustable Tap Wrench) but the descent ones are $50-$100 (AliExpress <$20).  Hold the part with pliers or in a vice, and have a go.

Print it the way it would go into the IFS, so small diameter down onto plate.  I use 100% fill, no brim, smooth plate, 80degC plate temp (so the part sticks).  If you have adhesion issue, please use brim, but then it needs to be cut off which is a pain.

Hopefully it useful.  Feedback always welcome.  Remixes every more welcome.