Magnetic Radion xr15 g5/6 light shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic shroud/shade to help block light from the edges of the g6 or g5 radion.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Creative Commons — Public Domain
I wanted a shroud that attached magnetically to my g6 Radion. The newer wide angle lenses caused quite a glare when we sat on the sofa across from the aquarium.
The Radion g6 has four magnets in the corners so you need to make sure the magnets are oriented in the correct way
The print needs to be paused at layer 20 (0.2mm layer height) to allow you to pop in four magnets in each corner (make sure they are the correct way round!). The holes are designed for 10mmx3mm magnets, but slightly thicker magnets could be used (four/possibly five millimetres max).
The total height of the shroud is 15mm, which kept it quite low profile, while blocking the light.
Printed in ABS, but petg should also be ok