1 / 2
Reusable PLA Zip Ties – 9 Sizes (10–26mm) – Flexible And Super Strong — image 1
1 / 2

Reusable PLA Zip Ties – 9 Sizes (10–26mm) – Flexible And Super Strong

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.08 – €0.10 net (excluding VAT)

For file: 12mm.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.09 excluding VAT (range midpoint).

Weight reported by the author
1 g
Print time reported by the author
6 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Reusable PLA zip ties in 9 sizes (10–26mm). Flexible, strong, and designed to be opened and reused multiple times

Rating
5 / 5
Likes
93
Downloads
246
Makes
1
Views
654
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This reusable zip tie set is designed for PLA and can be opened and reused multiple times without breaking ♻

⚡ Each zip tie uses only ~0,7g of material and takes about 4 minutes to print, making it fast and efficient to produce.

🔧 Perfect for:

  • Cable management

  • Organizing tools

  • Temporary fastening

  • Household and workshop use

♻ Why use this instead of regular zip ties?

  • Reusable → no waste

  • Very fast to print

  • Low material usage

  • Flexible and durable (TPU)

  • Easy to open and reuse

  • Strong grip without damaging cables

📏 Available sizes (9 total):

  • 10 mm – small cables

  • 12 mm

  • 14 mm

  • 16 mm

  • 18 mm

  • 20 mm

  • 22 mm

  • 24 mm

  • 26 mm – larger bundles

This range covers everything from small cable management to larger bundles, so you don’t need multiple different models.

🖨 Print settings (tested):

  • Material: PLA

  • Layer height: 0.2 mm

  • Infill: 15%

  • Walls: 2

  • Top/Bottom layers: 3

  • Speed: 40 mm/s

  • Supports: No

  • Orientation: Flat on the bed

⚡ Designed to print fast while still maintaining good flexibility and strength.

💡 Tips:

  • Adjust scaling slightly if you need tighter/looser fit

💬 If you need bigger or smaller sizes, let me know and I can add them!

👍 If you like this model, feel free to like and share

If you have TPU, you have to check out this model:

https://www.printables.com/model/1681367-reusable-tpu-zip-ties-9-sizes-12-29mm-flexible-and

Tags