Tactix 310mm box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two boxes for the smaller 310mm Tactix container. Both have 12mm wide label 'platform' to accommodate my label maker.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I re-made these from scratch as nobody had done them the way I wanted!!
Walls are 0.8mm thick - that means they print super-fast (just 2 x walls with a 0.4mm nozzle) and are certainly strong enough for anything you're going to fit into such a small box!!!
Label platform is 12mm wide so that my 12mm label maker labels fit perfectly.
Designed to be 1mm short (these are 42mm high - the box is 43 mm high) so that you can, if you prefer, emboss the label platforms with a 1mm high label. I also made the label platform flush with the top so that people with single-colour printers can pause, change filament, and still print the labels in a different colour filament.
Walls are soped slightly inwards towards the bottom so that this box fits in ALL spaces, including the top corners and the edges.
I did two models - one with an internal scopp and one without. I prefer the one with the scoop as it's way easier to get small bits out.
I've included the Fusion 360 files in case anyone wants to play around further with them.
If you need tubs for the front area, use these: https://www.printables.com/model/1374530-tubs-to-suit-tactix-310mm-22-compartment-organiser