1 / 2
Anet A8 Mostfet V1 holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model allows the MOSFET plate v1 to be mounted either above or below the Anet mainboard.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was designed for my own need to properly attach the MOSFET plate to the printer. My printer's frame has holes below the mainboard that I used to fix the holder in place, but you could easily use the same screws from the mainboard too.
Print Settings:
Material: ABS in my case could use PLA
Layer Height suggest : 0.15 mm
Infill: 25% at least
Walls: 5 perimeters