1 / 3
HEQ Swan K1 Pro dji Action 2 camera mount — image 1
1 / 3

HEQ Swan K1 Pro dji Action 2 camera mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount for the dji Action 2 camera for the Swan K1 Pro fixed wing VTOL drone by HEQUAVTech.

Rating
0 / 5
Likes
3
Downloads
17
Makes
0
Views
621
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

My Swan K1 Pro fixed wing VTOL drone came with a mount for the dji Action 2 camera.

After flying, I discovered that the mount does not hold the camera securely when the aircraft is in wing mode and this causes vibrations (jello) to appear on video. So, I designed this mount instead that helps eliminate jello while keeping the camera safe.

The design should be printed using TPU material and your printer should be dimensionally accurate as the tolerances are high.

Printing advice:

  • top lid with at least 30% infill and at least 3 perimeters at 0.2mm
  • base with at least 25% infill for the lower mount and 3 perimeters and at least 40% infill for the sidewalls, at 0.2mm.

You can use the provided .3mf files with PrusaSlicer 2.4.1 as they have the correct printing parameters, you only need to select your printer and slice the models.

Tags