1 / 5
Multi-needle felting tool - Holder for up to 7 felting needles (parametric) — image 1
1 / 5

Multi-needle felting tool - Holder for up to 7 felting needles (parametric)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple holder for 1-7 felting needles with a threaded top.

Rating
0 / 5
Likes
12
Downloads
95
Makes
0
Views
222
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Multi-needle felting tool - Holder for up to 7 felting needles (parametric)

Simple holder with cutouts for up to 7 felting needles and a threaded top to secure the needles.

Dimensions

The holder has a total height of 5.5cm and a width of 3.5cm (at the widest point). The distance between each needle slot is around 8mm.

The needles I used have the following dimensions and they're a pretty tight fit in the holder:

Total length: 85.5mm
Shank diameter: 1.85mm
Crank length (the horizontal part on top, including shank): 6.5mm

Let me know if you'd like to have different dimensions for this, I'm happy to upload alternative versions.

Printing

No supports needed. The top has some 2.5cm bridges but these print fine as-is at least on my Bambu Lab A1 mini.

Printed with adaptive layer height to make the top of the holder smooth and to help print the threading cleanly.

Modifications

This is an OpenSCAD model, so you can change the dimensions of the holder if you like. It uses the BOSL2 library, so you'll need to install this as well to change the parameters.

Tags