IKEA HEJNE drill guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easily drill holes to increase shelf height options
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 1
- Views
- 46
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
IKEA HEJNE's are cheap and functional wooden shelves, but with a default shelf height annoyingly incompatible with other IKEA accessories, such as the higher SAMLA boxes or the PAPPIS cardboard boxes, where a single is too low and a double too high and wastes space.
This drill guide allows to easily drill 1½-height shelves without any measuring.
CAD file available if you want to customise the hole spacing.
Printed with
Prusament PLA Jet Black
3 perimeters for increased pin strength
0.25mm layer height
No supports
Drilling
I used a 6mm drill bit and it worked fine. Careful, the wood likes to splinter on the other side.