1 / 6
Neptune 3 Pro 3x5015 shroud + adapter for bambu TZ4.0 hotend — image 1
1 / 6

Neptune 3 Pro 3x5015 shroud + adapter for bambu TZ4.0 hotend

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bambu TZ4.0 hotend mount and shroud for 3x5015 fans.

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
89
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

I've been looking for possibility to install hotend with integrated nozzle,

thus found some existing adapters for TZ4.0 hotend. I tried to fit them and

wasn't satisfied, thus designed my own version. It could somehow work with

various versions of double 5015 cooling designs for Volcano hotend, however,

I noticed that original 4010 hotend fan doesn't properly cool hotend radiator

due to completely wrong airflow - I could detect radiator temerature exceeding

60C, which is obviously too much. Thus, I took original Elegoo shroud and fitted

2X5015 fans for part cooling and another one for hotend with proper air duct design.

This allowed to reduceradiator temperature to reasonable 40C at just 50% of fan power.

The fans and ABL sensor are supposed to be fitted with self-tapping screws.

As for the hotend adapter - I use 4 M3 threaded inserts. The thread on 2 of them is

drilled out. Note that PETG is not suitable material for the adapter, the hotend

start wiggling after couple hours of printing, thus I used PC, which workes fine.

The shroud can be fixed using 6 M6 screws, but you don't need all of them.

As for the usefulless of such conversion:

Pros:

1. Integrated leakproof nozzle - with Volcano I always had leaks btw nozzle and heatbreak

despite proper tightening at hot temperature. After 30+ Kgs of printed PETG it started leaking.

2. Quick nozzle change;

3. Very quick nozzle heat up;

Cons:

1. Conversion requires some efforts;

2. TZ4.0 nozzle is likely made of steel, thus offers slightly less volumetric flow rate

than brass Volcano. My personal limit for PETG is 17 vs 18 mm3/s respectively.

Tags