Avatar The Last Airbender Uncle Iroh Tea
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uncle Iroh drinking tea
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 14
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
#000005 PLA Elegoo Matte Black Transmission Distance: 0.5
#43403d PLA Bambu Iron Grey Metallic Transmission Distance: 0.2
#9d432c PLA BambuLab Basic Brown Transmission Distance: 2
#57361c PLA Overture Chocolate Transmission Distance: 0.2
#b15533 PLA BambuLab Matte Terracotta Transmission Distance: 1
#f99963 PLA BambuLab Matte Mandarin Orange Transmission Distance: 2.9
#eebe98 PLA Geeetech Sand Gold Transmission Distance: 6.3
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Iron Grey Metallic
At layer #10 (0.88mm) swap to Brown
At layer #11 (0.96mm) swap to Chocolate
At layer #15 (1.28mm) swap to Terracotta
At layer #19 (1.6mm) swap to Mandarin Orange
At layer #23 (1.92mm) swap to Sand Gold for the rest.