Tesla Cybertruck wheel cap puller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool to remove Tesla Cybertruck wheel caps
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A better tool to remove Tesla Cybertruck wheel caps.
https://shop.tesla.com/product/cybertruck-wheel-cap-kit
The kit includes a little wire hook to remove the wheel caps. Didn't work well for me, required a lot of force, and easily slipped out of the holes in the cap.
I printed this using Prusament PETG on a Prusa MK4S. You'll want to experiment with part orientation. Unless you have some magic printer and material, you'll need supports. Where they are located is up to you. The prototype (pictured) was printed with a 0.6 mm nozzle, 20% infill. It survived removing all four wheel caps, but I'd recommend 100%, at least in the blade part that is inserted in the wheel cap. At 100%, this tool should last a long time. I'd bet that other materials would work well also, but I like orange PETG.