ATH-M50X magnetic mic mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic mic mod for the ATH-M50x headphones
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- GNU General Public License v3.0
Inspired by this design, this is my take on adding a mic to the Audio Technica ATH-M50x. The boom is made out of 2.5 mm² cable which is stiff enough to hold position but easy to reposition. Two 10×2 mm magnets covered in black electrical tape hold everything in place, making the mic easy to remove when not needed. During casual listening only a small clip is visible on the headphone, and when you need the mic it just snaps right on.
Built around a cheap Natec microphone, though .f3d source files are included so you can tweak tolerances or adapt it to a different mic.