Demon Slayer, Tanjiro Framed Bookmark
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A framed bookmark of Tanjiro from Demon Slayer
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 35
- Makes
- 1
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.
Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Beige 2 Transmission Distance: 3.7
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer (0.88mm) swap to Red
At layer (1.36mm) swap to Beige 2 for the rest.
Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.
More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames
They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections
