1 / 11
MMW-1 Magnetic Presence Sensor - LD2410C + ESP32-C3 High-Performance Housing — image 1
1 / 11

MMW-1 Magnetic Presence Sensor - LD2410C + ESP32-C3 High-Performance Housing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A magnetic, high-performance presence sensor case. No glue required. Optimized for ESPHome and Home Assistant

Rating
0 / 5
Likes
2
Downloads
10
Makes
0
Views
149
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

MMW-1 Human Presence Sensor (Basic Edition)

The MMW-1 is a high-performance, compact housing designed for the LD2410C mmWave sensor and ESP32-C3 SuperMini. This design features a technician-grade internal stack and a magnetic mounting system for tool-less maintenance.

Bill of Materials (BOM)

  • Electronics: ESP32-C3 SuperMini & LD2410C Sensor.

  • Magnets: 6x3 mm Neodymium Magnets.

  • Screws: 2x M3x4 mm Screws (to secure the protoboard).

  • PCB: Standard 2.54mm pitch protoboard.

Technical Specifications & Assembly

  • PCB Preparation: Cut your protoboard to exactly 30x30 mm. This size is required for the board to slide perfectly into the internal guide rails.

  • The "Header-Lift": Use headers to lift the boards away from the protoboard. This creates a safety air gap for thermal management and prevents ghosting issues.

  • Magnetic Mount: The backplate is designed for a press-fit for 6x3 mm magnets.

Links & Resources

Find the full wiring diagram, ESPHome YAML configurations, and shopping links for all components on the Circuit Savers GitHub: [Link]

Recommended Print Settings

Layer Height: 0.16mm (Critical for rail and magnet tolerances).

  • Wall Loops: 3 (Ensures the screw holes for the M3x4mm screws have enough "meat" to grab).

  • Infill: 15-20% Gyroid (Good strength for the magnetic backplate).

  • Material: PLA, PETG, or ABS/ASA.

  • Support: None required. The internal rails are designed to print cleanly without support.

For More Information]

Tags